System Operation Manual
SAT-DN-00434, Rev. B
LOBO
2017-05-16
Page 66 of 86
Copyright
2017 Sea-Bird Scientific. All rights reserved.
5.
SatCon supports drag-n-
drop operation. Select the log file (.raw) and drag it in to SatCon’s
Log Files
window, as shown.
6.
Similarly, let’s load the calibration files.
Select the .sip
and drag it to SatCon’s
Instrument Files
window.
SatCon should now appear as shown below. Note that the Instrument Files window is filtered by the
extension of the file that is dragged in
–
if you drop in a tdf file, only tdf files are displayed and if you
drop in a .cal file, only cal files are displayed. If you drop in a .sip file, however, all .cal and .tdf files in
the Instrument Package file will be displayed, as shown.
7.
Next, we want to instruct SatCon as to where to place the converted files. Select
View -> Properties
.
A File List Properties dialog box will appear. Notice that the Log File List and Instrument File List paths
are correct from our drag-n-drop operations above. At the bottom of the window is the Output File
List path
–
let’s set this to our test directory C:
\LOBOtest, as shown. Click OK to close the dialog.
