Sea-Bird Scientific ECO-FLNTUS Скачать руководство пользователя | Manualshive

Страница: 21 / 86

background image

System Operation Manual

SAT-DN-00434, Rev. B

LOBO

2017-05-16

Page 21 of 86

Copyright



2017 Sea-Bird Scientific. All rights reserved.

4.1

Sea-Bird Scientific STOR-X Datalogger/Controller

The STOR-X is a compact, low-power data logger that provides scheduled data acquisition in remote field
applications. It acquires and logs data from up to five instrument ports according to a user specified
sampling schedule, entering a low power deep-sleep mode between events to conserve power to allow

deployments for extended periods. All recorded data is date and time stamped from the STOR-

X’s precision

onboard real-time clock (RTC) to allow post-processing software to correlate all attached sensor data in
time, as well as correlation between each monitoring site.

For systems using wireless telemetry, a dedicated serial port on the STOR-X interfaces to an external cellular
modem (or other wireless interface). The modem is used to email recorded data and an activity record to

the user or server computer.  In addition the STOR-X uses the modem to download new schedule files from
a specified location, typically a server computer.  The STOR-X is shown below in Figure 8, mounted in a
DockLOBO or RiverLOBO frame.

Figure 8: STOR-X mounted in frame

The STOR-X features supply voltage monitoring with brownout protection to better support operation from

rechargeable  battery  power  sources.    The  supply  voltage  is  monitored  and  if  the  preset  lower  voltage
threshold is reached, the STOR-X suspends operation and sleeps for a fixed amount of time (1 hour) to allow
the power source time to recharge.  The STOR-X then checks the supply voltage; if the voltage has recovered
to a level above the upper voltage threshold, normal operation resumes.  If not, the STOR-X sleeps for 4
hours, and then rechecks the supply voltage.  The process repeats in 4 hour intervals until the supply voltage

has recovered.  Note that although  the upper and lower voltage thresholds are configurable,  these are
administration mode settings, and are set to match the power source.  Normally the end-user will not be
required to change these settings.  Note that the STOR-X also has a hardware low-voltage detection circuit
that will force the STOR-X to shut down gracefully if power is inadvertently removed.  Provided the autorun
feature  of  the  STOR-X  is  enabled,  the  shell  program  will  force  the  program  to  restart  when  power  is
restored.

STOR-X

Mounting Bracket (x2)

«
...
19
20
21
22
23
...
»

Содержание ECO-FLNTUS























































































Отзывы:

Нет отзывов

Похожие инструкции для ECO-FLNTUS

Бренд: Oakton Страницы: 4

Бренд: C-LOGIC Страницы: 4

Бренд: C-lock Страницы: 32

Бренд: C-LOGIC Страницы: 12

Бренд: janitza Страницы: 6

Бренд: janitza Страницы: 36

Бренд: Oceanic Страницы: 152

Бренд: Kaiterra Страницы: 8

Бренд: Kaiterra Страницы: 12

Бренд: Yamaha Страницы: 120

Бренд: Yamaha Страницы: 110

Portatone PSR-5700

Бренд: Yamaha Страницы: 79

Бренд: Yamaha Страницы: 112

Бренд: Yamaha Страницы: 82

Бренд: Yamaha Страницы: 108

Бренд: Kawai Страницы: 40

Бренд: Keithley Страницы: 18

Бренд: Polimaster Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды