System Operation Manual
SAT-DN-00434, Rev. B
LOBO
2017-05-16
Page 50 of 86
Copyright
2017 Sea-Bird Scientific. All rights reserved.
7.3.2.2
The Email To: Line
The To: address is configurable in the STOR-X. However,
for the as-shipped filters and scripts on the server
to operate properly, the user name must be “
lobodata
, and not
[email protected] Scientific.com
” as shown in
This generic approach can work
as LOBO connects directly with the server when sending the email.
7.3.2.3
The From: and Return-Path Lines
The STOR-
X’s email address is configurable in the STO
R-X. Although not required for system operation,
some networks may require that the return email address is valid for authentication so that the email is not
rejected as spam. Please contact your cellular service provider if an email address is required. The server
is also configured to only accept email from this user.
7.3.2.4
Custom X-header
The email will contain a custom email X-
header, of the format “X
-Sea-Bird Scientific-Instrument: STOR-X sn
XXXX”, where XXXX is the STOR
-X serial number.
7.3.2.5
Email Body
The email body contains the event log for the STOR-X.
7.3.2.6
Data Attachment
The STOR-X data file is attached to the email message. Note that base-64 encoding is used on the data file
prior to sending.
7.3.3
Web Server Interface
The main web page will be located at the se
rver’s
IP address described previously. Note that it is important
that the IP address remain static for the web interface to work properly. Generally, the web page will be
customized, with both a public and private interface. Below, we use some of the private Sea-Bird Scientific
interface as an example. Sea-Bird Scientific
’s present
main web page is shown below in Figure 34; your
page will look significantly different. You may modify the web page as desired provided the data and
schedule file locations do not change, as this would affect the server scripts as well as the STOR-X path
settings.
