SDT International SDT170, Руководство пользователя

Страница: 71 / 141

15. Recharging the battery pack
MAN.170.EN--04--SDT170-user-manual-Eng.docx 71/141
battery by switching on and off the unit, this reduces the life of the battery.
Once a charging cycle has begun, it should be allowed to finish.
Please refer to paragraph The status indicator light on page 57 for more
information on the status light of the battery charger.
15.2 R
ECHARGING OUT OF THE UNIT
The battery pack being always charged in fast mode, this is the best solution. The
unit can be used with another battery while charging the empty one.
Operation

Shift the battery lock towards the front of the unit (towards the build in
sensor).

Remove the battery pack by turning the equipment while maintaining the
battery lock towards the front of the equipment. Place your hand under the
battery pack and gently tap the unit against your hand. The battery pack will
release easily using this method.
Removing of the battery.
053

Plug the connector on the end of the battery charger into the connector on the
battery pack.

Unplug the charger from the mains before recharging a new battery, in order
to reset the internal timer.

Plug the battery charger in the mains socket.

The charging cycle will take about 5 to 6 hours to be completed.

Once charging over, replace the charged battery pack in the unit, like
previously indicated.