SDT International SDT170, Руководство пользователя

Страница: 47 / 141

47
10. The View Data menu
(M, M+ and MD)
This menu allows the viewing of the stored data for a given route already selected
in the
Select route
menu. It permits the user to display for any memory
number, the stored memory contents (four last values only).
It is assumed that measured data have been previously stored.
10.1 V
IEWING DATA WITH THE
SDT 170 M
AND
M+
Proceed as follows:

The equipment switched on, press the key to display the
Main menu
.

Using the or keys, select the line
View data
and press .

Select the Memory location (
0/999
until
999/999
) to be displayed using the
or keys. Hold the key to rapidly increment/decrement the memory
number.

Validate the selection by pressing the key. The available measurement(s)
is (are) displayed. When no data is stored on the selected memory location,
the display responds with
No measurement
; in this case, press again the
key to return to the previous display.

Use the or keys to select the measurement line to be displayed.

Press
shows a more detailed screen; see paragraph
Detailed information
below.

Return to the previous menus by pressing the key.