SDT International SDT170, Руководство пользователя

Страница: 23 / 141

6. Using the SDT 170 MD
MAN.170.EN--04--SDT170-user-manual-Eng.docx 23/141
6.9 S
ELECTION OF THE ROUTE
If the route selection is useless, go to the next paragraph.
1. Select the main menu with .
2. Select the line Select route with or
and push
.
3. Select the desired route with or
and push
.
4. Push
until to the main menu.
6.10 T
AKING A MEASUREMENT
When using the continuous function
Use this function when the average value is to be measured.
1. Point the sensor to the point to be controlled.
2. Read the signal level on the display.
The signal changes continuously. Measurement is to be performed while
listening at headphone signals.
The measurement screen when using the continuous function.
084
When using the maximal function
Use this function when the maximal value is to be measured.
1. Direct the sensor to the point to be controlled.
2. To visualizes the signal level:
Press Result
The maximum (peak value) is displayed for as long as the key is pressed.
When the
key is released, the
SDT 170 stops measuring. The display
shows the highest value recorded while the key was pressed.
To make a new measurement and erase the previous maximum value, just
press this again. If needed, store the measured value. Refer to next
paragraph.