SDT International SDT170, Руководство пользователя

Страница: 19 / 141

5. Using the SDT 170 M and M+
MAN.170.EN--04--SDT170-user-manual-Eng.docx 19/141
7 Select the communication port on which
the PC-SDT 170 M+ is connected to and
click
OK .
8 Click on the Get data button to launch
the transfer of the memorized data by the
SDT 170 M+ towards the PC.
The message
No response of
SDT170
is displayed when a fault occurs
during the transfer due to at least one of
the following causes :
-
SDT 170 M+ is off.
- Battery flat or discharged.
- Bad connection of the link cable or
defect.
- Bad selection of the Com port.
9 If necessary, click Erase to erase all data
previously stored in the SDT 170 M+
memory.
10 Once the transfer achieved, click on the
Close button to close the MPLus
application.
11 Switch of the SDT 170 M+ .