SDT International SDT170, Руководство пользователя

Страница: 123 / 141

23. Specificities of the SDT 170 M, M+ MD
MAN.170.EN--04--SDT170-user-manual-Eng.docx 123/141
Usage
The routes are defined and uploaded in the equipment by the means of a specific
SDT 170 Data Management software installed on a personal computer. The
conventions are:

Route 0 : is a non predefined route, and gives the possibility to the user to
store an optional, or non planned measurement or control point as needed.
This route is also called a scratch pad.

Others routes : predefined and uploaded routes (up to 128) from a personal
computer.
The route map.
011
Loading routes from the PC to the SDT170 MD
When delivered, the SDT 170 MD contains only the
STD 0
route. So, the menu
Route choice
is not available. The specific information of the routes is defined
by means of the SDT 170 - Data Management software , which is delivered with
the SDT 170 MD version. This software has to be installed on a personal
computer running Windows® . Refer to this manual to learn how to define and
store a route in the SDT 170 MD .
23.2 W
HAT IS A
M
EMORY
N
UMBER
This concerns only the SDT 170 M , M+ and MD .
Definition
A memory number is an electronic page, where data from any of the sensors is
stored.
A maximum of 1,000 independent storage locations, numbered from 0 to 999 are
available.
For each storage location, the SDT 170 M, M+ or MD stores the data (measured
value, unit, type of sensor used, time and date) of the last four measurements
made. The memory works on the theory of first in first out (FIFO), so the fifth
oldest measurement is automatically deleted.