manualshive.com logo in svg

SDMO R33C3, Руководство пользователя и по обслуживанию


Поделиться
Скачать
background image

viii

FOREWORD

Important information

To avoid the potential hazard, accident prevention 
activities must be planned methodically and con-
ducted continually by considering all aspect of 
engine operation, maintenance and inspection.All 
related personnel, including managers and supervi-
sors, should actively participate, recognize their roles 
and organize themselves and their work to ensure a 
safe environment.

The foremost safety objective is to prevent accidents 
which may result in injury or death, or equipment 
damage.

Always observe laws or regulations of the local or 
federal/national government.

Mitsubishi Heavy Industries, Ltd. cannot foresee all 
potential dangers of the engine, potential danger 
resulting from human error and other causes, or dan-
ger caused by a specific environment in which the 
engine is used. Since there are many actions that 
cannot be performed or must not be performed, it is 
impossible to indicate every caution in this manual or 
on warning labels. As such, it is extremely important 
to follow directions in this manual and also to take 
general safety measures when operating, maintain-
ing and inspecting the engine.

When the engine is used by individuals whose native 
language is not English, the customer is requested to 
provide thorough safety guidance to the opera-
tors.Also add safety, caution and operating signs that 
describe the original warning label statements in the 
native language of the operators.

The engine must be operated, maintained and 
inspected only by qualified persons who have thor-
ough knowledge of engines and their dangers and 
who also have received risk avoidance training.

To prevent an accident, do not attempt to carry out 
any operation other than those described in this man-
ual, and do not use the engine for any unapproved 
purpose.

When the ownership of the engine is transferred, be 
sure to provide this manual with the engine to the 
new owner. Also inform Mitsubishi Heavy Industries, 
Ltd. of the name and address of the new owner of the 
engine.

This manual is copyrighted and all rights are 
reserved.No part of this manual, including illustra-
tions and technical references, may be photocopied, 
translated, or reproduced in any electronic medium 
or machine readable form without prior written con-
sent from Mitsubishi Heavy Industries, Ltd.

The contents in this manual are subject to change at 
any time without notice for improvement of the 
engine.

Pictures or illustrations of the product in this manual 
may differ from those of product you have. Please 
note that, depending on specifications, items 
described in this manual may differ from those on 
your engine in shape, or may not be installed on your 
engine.

Please contact a dealer of Mitsubishi Heavy Indus-
tries, Ltd. if you need more information or if you have 
any questions.

If you lost or damaged this manual, obtain a new 
copy at a dealer of Mitsubishi Heavy Industries, Ltd. 
as soon as possible.

Mitsubishi Heavy Industries, Ltd. recommends the 
engine owner to install an hour meter on the engine 
due to monitor correct running intervals and to per-
form the maintenance at the appropriate timing.

105/242

Содержание R33C3





















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для R33C3

Hamilton/Buhl MV-9700 Quick Manual preview
MV-9700
Бренд: Hamilton/Buhl Страницы: 2
Yamaha EF3000iSE - Inverter Generator - 3000 Maximum AC... Service Manual preview
EF3000iSE - Inverter Generator - 3000 Maximum AC...
Бренд: Yamaha Страницы: 327
LNI 69208018 Operating Manual preview
69208018
Бренд: LNI Страницы: 42
Sangean WR-11BT Safety Instructions preview
WR-11BT
Бренд: Sangean Страницы: 13
Power Stroke PS906800 Series Operator'S Manual preview
PS906800 Series
Бренд: Power Stroke Страницы: 72
Lloyd's LPD-902 Instruction Book preview
LPD-902
Бренд: Lloyd's Страницы: 24
Joy-it JT-PSG9080 Flash Manual preview
JT-PSG9080
Бренд: Joy-it Страницы: 5
Whisper Power W-SQ-Pro Installation Manual preview
W-SQ-Pro
Бренд: Whisper Power Страницы: 47
Whisper Power M-SQ Pro 27 User Manual preview
M-SQ Pro 27
Бренд: Whisper Power Страницы: 46
Curtis DVD8007D Preliminary Specification Sheet preview
DVD8007D
Бренд: Curtis Страницы: 1
HP 1901A Operating And Service Manual preview
1901A
Бренд: HP Страницы: 36
HP 8116A Quick Manual preview
8116A
Бренд: HP Страницы: 9
HP 81104A Quick Start Manual preview
81104A
Бренд: HP Страницы: 116
HP 81101A Reference Manual preview
81101A
Бренд: HP Страницы: 118
HP 8112A Operating, Programming And Servicing Manual preview
8112A
Бренд: HP Страницы: 406
Samsung DVD-L300 Manual preview
DVD-L300
Бренд: Samsung Страницы: 33
Samsung DVD-L200 Service Manual preview
DVD-L200
Бренд: Samsung Страницы: 45
Samsung DVD-L200W Manual preview
DVD-L200W
Бренд: Samsung Страницы: 61

Бренды по названию

Популярные бренды

Загрузить еще бренды