3.
Procedure for glucose
1)
Take a glucose test strip from a container. Make sure to tightly close the container cap after
taking a glucose test strip.
2)
Insert a glucose test strip into the Glucose Test Strip Slot of the analyzer. The analyzer will
automatically enter the glucose testing mode.
3)
When the blood drop symbol flashes next to the glucose strip symbol, you are ready to
perform a glucose test.
4)
Obtain a drop of blood sample from your fingerstick or alternative site, using a lancet and
lancing device.
NOTE: Refer to Chapter 3, Collecting Blood Samples, for instructions on how to collect the
blood sample from your fingerstick or alternative site.
5)
Touch the top edge of the test strip to the blood on your finger. Do not take off your finger
until the yellow window is completely filled with blood. Do not drop the blood from above.
6)
The blood will be drawn into the glucose strip automatically.
7)
The analyzer display counts down from 5 to 1 (seconds), and your result will appear on the
display after 5 seconds.
8)
When the test is done, pull out the used glucose test strip. The Analyzer will shut off
automatically in 3 seconds.
- 36 -
Содержание 02LA10G
Страница 1: ......
