SD Biosensor 02LA10G, Руководство пользователя

Страница: 12 / 57

2. Setting the analyzer
The following table provides an overview of the available settings.
Stage Setting Options Default Setting
1 Beep On, Off On
2 Year YYYY 2015
3 Date Format m-d, d-m m-d
4 Date mm-dd, dd-mm 1- 1
5 Time Format 12h, 24h 12h
6 Time hh:mm 12:00 AM
7 Units of the Test Result mg/dL, mmol/L mg/dL
8 Auto Printing On, Off On
9 Printing Page P-1, P-2 P-1
10 Hypo warning (for glucose) Off, 60,70,80 Off
11 Alarm Off, 4 Alarms Off
12 Bluetooth (PC)
*
On, Off Off
13 Bluetooth (Printer)
*
On, Off Off
14 Bluetooth Repairing(Printer)
*
On, Off Off
* These functions are only for the 02LA20G w ith Bluetooth module.
STAGE 0) Entering the setting mode
1) Press the SET/PRT button (on the top of the analyzer) for three seconds to enter the setting
mode after turning the analyzer on or in the standby state. If you want to leave the setting
mode during any of the steps, press the SET/PRT button quickly.
2) Press the left or right button to change the current flashing setting. You can press the left or
right button as many times as needed (or keep it pressed) until the desired setting (value) is
reached.
- 12 -