SCOV SV600 Series, Руководство пользователя

Страница: 88 / 198

7 Parameter Description SV600 Series User Manual
82
Function
code
Name Setting range Default Property
P0-17 Acc.time1
0.00 s ~ 650.00 s (P0-19=2)
0.0 s ~ 6500.0 s (P0-19=1)
0s ~ 65000 s (P0-19=0)
Depends
on model
☆
P0-18 Dec. time1
0.00 s ~ 650.00 s (P0-19=2)
0.0 s ~ 6500.0 s (P0-19=1)
0s ~ 65000 s (P0-19=0)
Depends
on model
☆
P0-19 Acc./Dec. time unit
0: 1s
1: 0.1s
2: 0.01s
1
★
Acceleration time is the time required by the inverter to accelerate from 0 Hz to the frequency
set in P0-25.
Deceleration timeis the time required by theinverter to decelerate from the frequency set in
P0-25 to 0 Hz.
Please notice that the actual Dec. time will be much longer than the value set in P0-18 when
overvoltage stall occurs.
Total four group Acc./Dec. time can be selected by multi-function DI terminal. For the setting of
the DI, please refer to the description of DI.
Acc./Dec. Time 1: P0-17,P0-18
Acc./Dec. Time 2: P8-03,P8-04
Acc./Dec. Time 3: P8-05,P8-06
Acc./Dec. Time 4: P8-07,P8-08
Function
code
Name Setting range Default Property
P0-21
Offset frequency of auxiliary
frequency source Y
0.00 Hz ~ maximum frequency
P0-10
0.00 Hz
☆
When the main frequency X and auxiliary frequency Y are used together, the offset set in P0-21
would be added.
The final set frequency= the calculation frequency of X and Y +P0-21
Function
code
Name Setting range Default Property
P0-22
Frequency command resolution
1: 0.1 Hz
2: 0.01 Hz
2
★
Used to set the resolution of all frequency parameters.
Note: Modifying this parameter will make the decimal places of all frequency parameters change and the
corresponding frequency values change.