SCOV SV600 Series, Руководство пользователя

Страница: 101 / 198

SV600 Series User Manual 7 Parameter Description
95
33: External Fault Input(NC Normal Close)
34: Frequency modification enable
35: Reverse direction of PID action
36: External Stop terminal 1
37: Control command switchover terminal 2
38: PID integral pause
39: Switchover between main frequency X
and preset frequency
40: Switchover between auxiliary frequency
Y and preset frequency
41: Motor selection terminal 1
42: Reserved
43: PID paramete switchover
44: User defined fault 1
45: User defined fault 2
46: Speed control/torque control switchover
47: Emergency stop
48: External Stop terminal 2
49: Deceleration DC brake
50: Clear the current running time
51: Switchover between two-wire and
three-wire 52-59: Reserved
Those parameters are used to select the function of each DI.
0: No function
1: Forward run (FWD)
2: Reverse run (REV)
3: 3-wire operation control
3-wire operation control takes effect when the DI is valid. For more details, please refer to the
description of P4-11.
4: Forward JOG running
5: Reverse JOG running
For function 4 and 5, the related parameters like JOG frequency, Acc./Dec. time are P8-00,
P8-01 and P8-02.
6: Terminal UP
7: Terminal DOWN
When function 6 and 7 selected,the DI with UP and DOWN functions are used to increase and
decrease the setting frequency.
8: Freely STOP
When the DI is valid, the inverter will block is output and the motor stops freely.
9: Fault Reset
10: Run pause
The inverter will decelerates to stop when the DI with the function is valid. When the DI
becomes invalid, the inverter resumes its status before stop.