SCOV SV600 Series, Руководство пользователя

Страница: 113 / 198

SV600 Series User Manual 7 Parameter Description
107
29: Current 2 reached
Refer to the descriptions of P8-40 and P8-41.
30: Timing reached
If the timing function (P8-42) is valid, the DO becomes ON after the current running time of the
inverter reaches the set time.
31: AI1 input limit reached
If AI1 input is larger than the value of P8-46 or lower than the value of P8-45, the DO becomes
ON.
32: Underload
If the load decreases deeply, the DO becomes ON.
33: Reverse running
34: Zero current state
Refer to the descriptions of P8-28 and P8-29.
35: IGBT temperature reached
If the heatsink temperature of the inverter IGBT (P7-07) reaches the set IGBT temperature
threshold (P8-47), the DO becomes ON.
36: Output current limit exceeded
Refer to the descriptions of P8-36 and P8-37.
37: Low limit frequency reached (Output at stop)
If the running frequency reaches the low limit, the DO becomes ON. In the stop state, the signal
is still ON.
38: Alarm output (all faults)
If fault occurs on the inverter and the inverter continues to run, the DO outputs the alarm signal.
39: Motor overheat pre-wawrning
If the motor temperature reaches the temperature set in P9-58, the DO becomes ON. You can
view the motor temperature by using U0-34.
40: Current running time arrived.
If the current running time of inverter exceeds the value of P8-53, the DO becomes ON.
41: Fault output (No output when it’s fault with freely stop or under-voltage)
When fault occurs on the inverter, the DO becomes ON. But for fault with freely stop or
under-voltage, it becomes OFF.
Function
code
Name Setting range Default Property
P5-06
HDOP output function
selection
0: Output frequency
1: Set frequency
2: Output current
3: Output torque (absolute value)
4: Output power
0
☆