Scout Boats 245 Abaco, Руководство пользователя

Страница: 65 / 135

65
Stern Seat and Wave Gate Folded
Stern Seat and Wave Gate Up
The bottom center seat cushion is mounted to a
slotted hinge that allows it to drop in front of the
stern seat base where it is secure and to allow the
backrest to fold down. It can also be removed.
To fold the seat, lift the front of the bottom seat
cushion and pull it toward the bow of the boat.
The retaining pins at the rear of seat will clear the
receivers as the seat moves forward in the slotted
hinges. Then lower the cushion until it is vertical.
Pull forward on the wave gate/backrest to release
the friction latches. It is hinged and will lower to
rest flat on the seat base, securing the bottom seat
cushion and providing a standing platform.
To raise the seat, make sure the engines are down
and raise the wave gate/backrest to the full up
position. Push firmly to secure it with the friction
latches. Then lift the front of the bottom seat
cushion until it is horizontal, then push it towards
the stern. As the cushion slides back in the slot-
ted hinges, align the retaining pins at the rear
of the seat with the receivers. Push the front of
seat towards the stern and down to fully seat the
retaining pins and secure the seat cushion.
To remove the seat, lift the front of the bottom
seat cushion and pull it toward the bow of the
boat until the retaining pins at the rear clear the
receiver. Then lower the cushion until it is almost
vertical. Align the hinge pin with the top slot in
the port slotted hinge. Lift the port side of the
cushion until the pin clears the hinge and remove
the seat.
Notice:
Periodically inspect the folding seat fittings
for wear, damage or loose fit. Any problems
should be inspected and corrected immedi-
ately.
Stern Bilge Access
There is a removable access hatch below the stern
seat that provides access to the fuel filters, aft
bilge pump and other equipment mounted in the
stern bilge.
Rod Racks
There are two recessed rod storage racks located
below each gunnel in the cockpit. Always make
sure the rods are properly secured in the storage
racks with the rod tips forward.
Stern Bilge Access Hatch