Scout Boats 245 Abaco, Руководство пользователя

Страница: 100 / 135

100
WARNING
the clear curtains used on your boat, please con-
tact the Scout Customer Service Department.
The T-top enclosure must be removed when
trailering. Canvas enclosures are not designed to
withstand the extreme wind pressure encountered
while trailering and will be damaged. Always
remove and properly store the enclosure before
trailering your boat.
CARBON MONOXIDE IS A LETHAL, TOXIC GAS THAT IS
COLORLESS AND ODORLESS. IT IS A DANGEROUS GAS THAT
WILL CAUSE DEATH IN CERTAIN LEVELS.
Corian Surfaces
A mild liquid detergent and water or ammonia-
based cleaners will remove most dirt and stains
from Corian. For heavy cleaning, oil, and grease,
use Fantastik spray cleaner. Rinse with a clean
cloth moistened with freshwater. Wipe dry with
a clean cloth.
In most cases, Corian can be repaired if acciden-
tally damaged. Minor damage, including scratches,
general or chemical stains, scorches or burns,
and minor impact marks, can be repaired with a
light abrasive cleanser and a Scotch-Brite® pad.
For heavier damage, light sanding and machine
buffing may be necessary so contact your dealer
or a professional.
• Avoid exposing Corian to strong chemicals,
such as paint removers, oven cleaners, etc. If
contact occurs, quickly flush the surface with
water.
• Remove nail polish with a non acetone-based
polish remover and flush with water.
• Do not cut directly on Corian counter tops.
Granicoat Counter Tops
Granicoat is a molded fiberglass/gelcoat product
that looks similar to Corian or Karadon. A mild
liquid detergent and water or ammonia-based
cleaners will remove most dirt and stains from
granicoat surfaces. For heavy cleaning, oil, and
grease, use Fantastik spray cleaner. Rinse with a
clean cloth moistened with freshwater. Wipe dry
with a clean cloth.
In most cases, granicoat can be repaired if acci-
dentally damaged. Minor damage, including mi-
nor scratches, general or chemical stains, can be
repaired by hand buffing with rubbing compound
followed by a coating of boat or automotive wax.
Heavier damage can be professionally repaired.
Contact your dealer, Scout Customer Service or
a fiberglass repair professional for assistance
in repairing deep scratches, cracks and chips in
granicoat.
• Remove nail polish with a non acetone-based
polish remover and flush with water.
• Do not cut directly on counter tops.
Teak Surfaces
The teak and holly cabin sole or cockpit inlays
are sealed with teak oil. It is important to avoid
tracking sand and dirt on the cockpit sole and
teak inlays. Sand and dirt acts like sand paper
and will eventually sand off the finish in the traffic
areas. The wood can be sanded and refinished
as necessary.
We don’t recommend that you use varnish on the
wood. The wood grain is a natural nonskid and
too much varnish or polyurethane will fill the grain
and make the wood slippery. It is much better
to us high quality teak oil to protect the teak and
holly inlays.
13.3 Interior
The cabin or head interior can be cleaned just
like you would clean a home interior. To preserve
woodwork, use teak oil. To maintain carpeting,
use a vacuum cleaner. Because air and sunlight
are very good cleansers, periodically put cushions,
sleeping bags, etc. on deck, in the sun and fresh
air, to dry and air out. If cushions or equipment
get wet with saltwater, remove and use clean,
fresh water to rinse off the salt crystals. Salt
retains moisture and will cause damage. Dry
thoroughly and reinstall.
Vinyl headliner material should be cleaned periodi-
cally as explained in the previous section. Avoid
using products containing ammonia, bleach, or
harsh chemicals as they can shorten the life of
vinyl.
If you leave the boat for a long period of time,
put all cushions on their sides, open all interior