Scott QuadScan II 7400, Руководство по эксплуатации и техническому обслуживанию, Страница: 61 / 121

56 of 116
Remote Relay Operation
The remote relays operate from the alarm signals from the QuadScan II. Each of the 1 through 8 relays
can be programmed for various combinations of alarm inputs. The programming allows AND / OR
configurations for zone applications as well as many others. Refer to
Figure 14 for the factory default of
the remote relay settings
.
Figure 14 - Remote Relay Settings Factory Default
The remote relays can be programmed to any specific alarm condition and are activated independently
from each other. The unit is shipped with factory default settings in place for each relay. The defaults are
as follows:
Relay 1 – W1 Relay 2 – A1 Relay 3 – W2
Relay 4 – A2 Relay 5 – W3 Relay 6 – A3
Relay 7 – W4 Relay 8 – A4