Scott QuadScan II 7400, Руководство по эксплуатации и техническому обслуживанию, Страница: 59 / 121

54 of 116
Figure 12 - Remote Relay Assembly Outline Dimensional & Installation Drawing (P/N 096-2691)
Wiring
Remove the enclosure cover exposing the terminal blocks. The terminal blocks are labeled with the
appropriate function and wire designation to implement correct wire hook up. Refer to
Figure 12 for
terminal block layout.
The supplied 10-foot cable should be cut to the correct length and stripped to make the terminal
connections. The cable wires are connected, point-to-point. Refer to
Figure 13 for wiring information. All
wiring, cabling and conduit runs must meet local electrical codes and meet the National Electrical Code.