Scott QuadScan II 7400, Руководство по эксплуатации и техническому обслуживанию, Страница: 56 / 121

51 of 116
Press the ENTER button.
Press the ESCAPE button.
Press the ESCAPE button.
For this example select YES. Press the
ENTER button. This display is shown for
2 seconds.
After the time out period, the display
reverts to the default display.
NOTE: At this point all ALARMS are active.
Press the ENTER button.
Press the DOWN button. This is the start to
program Channel 2.
All Channels are programmed in the same
manner as Channel 1.
When the programming is completed for all
active channels, the following can be
implemented.
At this time if you wish to setup a SECURITY
CODE, refer to the Security Menu.
Wiring can now be completed to all external
alarm and/or shutdown devices.
When the wiring is completed, refer to The
Inhibit section in the System Menu to remove
the INHIBIT from all channels, if the inhibit
LCD is flashing.
CAL LOOP OUTPUT
0 % LEL
0 % LEL
0 % LEL
96
CHANNEL MENU
0 % LEL
0 % LEL
0 % LEL
97
SAVE SETUP? YES
0 % LEL
0 % LEL
0 % LEL
98
SYSTEM SAVED
0 % LEL
0 % LEL
0 % LEL
99
0 % LEL
0 % LEL
0 % LEL
0 % LEL
100
* SETUP *
0 % LEL
0 % LEL
0 % LEL
101
0 % LEL
* SETUP *
0 % LEL
0 % LEL
102