Overview
5
SCOTT SAFETY
087-0067 REV A
6
Electrical Box - Contains all the electrical circuits needed for the
motor/compressor running and PLC power supply.
7
440/220VAC Power Connection - Supplies VAC to the device.
8
Fuses - Two (2) fuses that protect the electrical circuits.
9
E-Stop - Manually shuts down the compressor.
10
Horn - Alarms indicating important events
11
Oil Drain - To drain oil when required.
12
Oil Level Sight Glass - To check the oil level is adequate.
13
Second Stage Safety Relief Value - To release high pressure air to protect the
compressor in case of mechanical failure. This specific value pertains to the
second stage of the process.
14
Third Stage Safety Relief Value - To release high pressure air to protect the
compressor in case of mechanical failure. This specific value pertains to the
third stage of the process.
15
Inlet Air Filter - Allows exterior room air to enter the compressor.
16
Oil Fill - To add oil as needed.
17
Fourth Stage Safety Relief Value - To release high pressure air to protect the
compressor in case of mechanical failure. This specific value pertains to the
fourth stage of the process.
18
Oil Filter - Filters the oil.
19
DP Sensor - Monitors for excessive moisture amounts of Dew Point (DP) in
the compressor.
20
CO Sensor - Monitors for high amounts of Carbon Monoxide (CO) in the
breathing air.
21
First Stage Safety Relief Value - To release high pressure air to protect the
compressor in case of mechanical failure. This specific value pertains to the
first stage of the process.
22
Interconnect Cable - Provides communications between devices.
*Note: Not all models are equipped the same.
Table 5
Compressor Major Parts Example
REFERENCE
NUMBER
ITEM*
Содержание HushAir Connect 7500
