Scott Safety HushAir Connect 7500, Руководство пользователя

Страница: 50 / 120

28
CHAPTER 3: CONFIGURATION AND SETUP
087-0067 REV A SCOTT SAFETY
– Alerts without Overrides - These conditions display in the alert section of the
HMI and each alert produces an associated audible alarm via the horn.
However, no override is allowed. See
Table 13 .
.
•
Information - Displays applicable information based on either standalone of a
compressor or charge station or a combination. Typically this covers the status of
specific parameters. See
Table 14 .
Opera
tion
Pressu
re
Max 7500psig 0 to
120Sec 50Sec % of
output
press No Yes Up to 3
(1Hr) 10% No
CO2 0 to 5% 0 to 60Sec 30Sec 1000ppm 5000ppm Yes Up to 3
(1Hr) 5000pp
m 2Min
O2 0 to 25% 0 to 60Sec 10Sec O2<
19.5% O2< 19.5% Yes No No No
H2S 0 to 50ppm 0 to 60Sec 2Sec 5ppm 5ppm Yes No No No
Slip-I
n door
Close
d SW 0 to 60Sec 15Sec SW Signal SW Signal Yes No No No
Comp
ressor
Enclo
sure
Open SW 0 to 60Sec 5Sec SW Signal SW Signal
Incom
ing
Power
Irregu
lar Motor Saver
Table 12 Alerts with Override Default Settings - Compressor (continued)
ITEM
MEASUREM
ENT RANGE
ALARM
TIME
DELAY
RANGE
TIME
DELAY
ALARM
WARNING
ALARM
SHUTDOWN
ALARM
STATES
HORN
ALARM
MANUAL
OVERRIDE
OVERRI
DE
MAX.
LIMIT
COOL
DOWN
CYCLE
Table 13 Alerts without Override Events - Compressor
ITEM EVENT
Condensate Reservoir Full
Oil Pressure No oil pressure
Drain Fails at a specific compressor stage level
Solenoid Value Fails