- 7 -
Ways the Glykool 130+ should NOT be used
This unit is intended for use as a cooling unit to cool beers, largers and ciders
and glycol to the correct temperature. It is designed to be installed in the
system between the bulk storage facilities and the dispense head with the
product(s) passing through the cooling coil(s) where fitted in the unit.
There are
NO
other recommended uses for the equipment
Correct Safe Handling
The weight of the units is such that other than moving it across flat ground
(which is facilitated by integral castors/wheels) or lifting to a relatively safe
height of 12 inches (30 cm) utilising two people, a mechanical lifting device
should be used.
Unit Weight
Shipping Weight: 75 kg
Operational Weight: 125 kg
WARNING: THIS UNIT IS UNSUITABLE FOR USE BY UNSUPERVISED
CHILDREN, THE ELDERLY AND THE INFIRM
Dismantling / Decommissioning Procedure
•
Isolate the unit from the mains electricity supply.
•
Isolate the product supply from where the unit is connected.
•
Isolate the unit from the coolant lines.
•
Drain the glycol mixture in the header tank into suitable containers.
•
Siphon or pump out the water mixture from the bath
WARNING: FAILURE TO REMOVE ALL WATER/GLYCOL COULD
RESULT IN SUBSTANTIAL AMOUNTS OF WATER/GLYCOL BEING
RELEASED FROM THE UNIT WHICH MAY BE DETRIMENTAL TO THE
UNIT AND/OR ITS SURROUNDINGS AND INCREASE THE MAXIMUM
WEIGHT OF THE UNIT.
