SCOTLE ACHI-HR15000, Инструкция по эксплуатации

Страница: 8 / 26

temperature galvanic
17 Top hot air adjust Control of the upper part
of a heating nozzle size
of the wind Clockwise to
increase air flow,
counter-clockwise
18 Foot Support and adjust
height Elevated body
clockwise,
counterclockwise
19 Cross-flow cooling fan After cooling the PCB
heating
Choose manual or
automatic
20 Fixture slide PCB board supporting
bar fixed The PCB into
V-groove, moving
pallets for clamping
21 Monitor BGA and PCB
alignment display
images Good video,
connector plug,
power cord
5. Program settings and operation
(I) Power to prepare power on:
1. Careful check examination after installed, the switch power on.
2. Check the emergency stop button is pressed or not (Note: If emergency
stop button is pressed, the device will cut off the control power.)
(II) “Operation” Operate
1. After power on, the touch screen will be display (as Figure1) interface,
click “Operation” button, appears operation curve interface. (Figure2).
(Figure1)