13.1.7.1
GENERAL
Fig. 21
– General Alarm Screen
•
Enable Buzzer:
Allows for generally enabling or disabling buzzer functions. If disabled, the buzzer will not be triggered when the device
reaches an alarm situation.
•
Allo
ws for Disabling the Buzzer By Keyboard:
If sel
ected, it lets the user mute buzzer by pressing any key when it is sounding during an
alarm situation.
•
Buzzer Duration:
Allows for setting the buzzer duration for each time the device enters an alarm situation. The configuration will be in
seconds, from 0 to 65000 s, where 0 means that the buzzer should not be triggered.
•
Enable Digital Output:
Allows for generally enabling or disabling digital output functions. If disabled, the digital output will not be triggered
when the device reaches an alarm situation.
13.1.8 DATA LOG CONFIGURATION
Fig. 22
– Data Logging Screen: Mode
13.1.8.1
LOGS
•
Register Logs:
Allows for enabling or disabling data logging on the device. If the device is not logging, the date will not be published to
NOVUS
Cloud
.
•
Log Interval:
Allows for selecting the frequency, in seconds, at which an acquisition must be made and saved in the memory.
○
Minimum Interval:
1 seconds.
○
Maximum Interval:
12 hours.
13.1.8.2
START MODE
•
Immediate Start:
Allows logging to be started shortly after the device is reconfigured.
•
Date/Time:
Allows for setting the date/time when logs should be started.
•
By Keyboard:
Allows for changing the log status to enabled on a display screen, starting logging.
•
By Digital Input:
Allows logging to be started from the digital input. This parameter will be available if the digital input is enabled and configured
in the "Log Control" mode. The logs will thus be started as soon as the digital input is activated. The log edge should be configured in the digital
input parameters.
•
Daily:
Allows logging to be started every day and at the configured time. A "Daily" log start mode requires a "Daily" log end mode.
41/66
