SCREEN
MNEMONIC
4. Digital Input
c) Pulse Count:
Accumulator
5. Digital Input
d) Event Logging
or Log Control
INFORMATION
DESCRIPTION
When enabled and configured in the "Pulse
Count" mode and then set to "Volume since
Last Reset" (
Application
parameter /
Flow
Rate
function) or the option "Accumulated
Count Since Last Reset" (
Application
parameter /
Count
function), displays the
volume or count accumulated since the last
digital channel reset. If it is not configured,
this screen will not be displayed.
Uses the third line of the display to display the
accumulated volume or count.
When enabled and configured in "Event
Logging" or "Log Control" modes, it displays
the last event detected at the digital input. If
this option is not configured, this screen will
not be shown.
Line 1: Edge detected in event: 0 – Falling
edge; 1 – Rising edge.
Line 2: Day.Month of the event (if the 24-hour
format is selected); Month.Day of the event (if
the AM/PM format is selected).
Line 3: Hour:Minute of the event.
KEY FUNCTIONS
Key pressed or held: Informs the
maximum flow reached in the pulse count from
the digital input.
Key pressed or held: Informs the minimum
flow reached in the pulse count from the digital
input.
Both keys pressed: Clears the
minimum and maximum values reached by each
analog channel.
Displays the "
Clr
" message upon completing
the operation.
Key pressed or held: No action.
Key pressed or held: No action.
Both keys pressed: No action.
6. Internal
Temperature (Cold
Joint)
Displays the internal device temperature. This
temperature will be used for Cold Joint
compensation in thermocouple type sensors.
Key pressed or held: No action.
Key pressed or held: No action.
Both keys pressed: No action.
10/66
