Scientific Atlanta PowerVu D9834, Руководство пользователя

Страница: 46 / 64

30 PowerVu D9834/D9835 Satellite Receiver User’s Guide 4007520 Rev B
Selection Options Description Default
IGMP
(Internet Group
Management
Protocol) On, Off This specifies whether IGMP
is used or not. When en-
abled (On) the receiver dy-
namically accepts multicast
requests from other network
devices to join multicast
groups with the specified
multicast IP addresses. Off
RIPv2 Mode
(Routing
Information
Protocol) On, Off This specifies whether
RIPv2 is used or not. When
enabled (On), other network
devices can request specific
unicast IP addresses to be
filtered. The receiver dy-
namically accepts up to 10
unicast IP address requests
from other devices. Off
Changing the IP Address
The IP address, Subnet Mask and Gateway Address should be changed together, i.e., as a
group. The following table shows the most commonly used
Subnet Mask
values to
enter for a chosen IP address, which depends on the size of your network.
Mask Subnet Mask
8 255.0.0.0
16 255.255.0.0
24 255.255.255.0
To change the IP address…
Go to Change IP and press OK .
Enter a valid IP Address, followed by Subnet Mask and Gateway
Address.
Press OK to save each change.