CAUTION
Do not leave landing light ON for more than one minute during
next check; lamp will overheat and lamp life will be shortened.
Exterior lighting (landing, position and anticollision lights) for
proper operation; all switches OFF after check.
WARNING
DO NOT LEAVE PITOT HEAT ON DURING NEXT CHECK
FOR MORE THAN ONE MINUTE; SEVERE BURNS MAY
RESULT IF PITOT TUBE IS TOUCHED.
PITOT HTR switch ON for a few seconds. Heated pitot tube will
feel warm to the touch; turn switch OFF after check.
Communication, navigation and intercom equipment for proper
operation; turn switches OFF after check.
All installed auxiliary or optional systems and equipment for proper
function.
7-2. RELATED PUBLICATIONS
Refer to Basic HMI Section 2 for a listing of related publications and
directives.
7-3. MAINTENANCE INFORMATION REQUESTS
Questions that may arise during maintenance of the helicopter or it’s
components should, when possible, be referred to the Authorized
Field Service Representative or Schweizer Customer Service
Department.
Handling, Servicing & Maint.
Pilot's Flight Manual
Schweizer RSG, LLC.
Model
269D
Helicopter
7-10
Reissued:
16
Jan 2019
Book 3.indd 172
8/4/19 1:25 PM