Section IV
NORMAL PROCEDURES
4-1. PREFLIGHT REQUIREMENTS
Have a thorough understanding of operating limitations. Refer to
Section II.
Service helicopter as required. Refer to Handbook of Maintenance
Instructions (HMI).
Determine that helicopter loading is within limits. Refer to Section
II and VI.
Check helicopter performance data. Refer to Sections V and VI.
Determine that the Daily Inspection (in accordance with the HMI or
Section VII of this manual) has been accomplished within 24 hours
prior to the first flight of each day.
Perform pilot’s preflight inspection prior to each flight.
NOTE:
Refer to the applicable Rolls Royce Operation and
Maintenance Manual listed in Related Publications and Directives
table, Section II, Basic HMI for detailed requirements on daily
inspection of the engine.
It is the prerogative and responsibility of the helicopter operator or
owner to increase the extent and/or frequency of inspection to
p r o m o t e s a f e o p e r a t i o n w h e n u n u s u a l l o c a l c o n d i t i o n s
(environment, utilization, etc.) dictate.
Brief passengers and non-flight crew members on precautions and
procedures necessary to avoid undue hazard when approaching or
departing the helicopter.
Normal Procedures
Schweizer RSG, LLC.
Model
269D
Helicopter
Pilot's Flight Manual
4-1
Revised:
16
Jan 2019
FAA Approved
Book 3.indd 89
8/4/19 1:25 PM
