Transmission oil level
CHECK
Tail rotor shaft, set alignment marks
CHECK
Exhaust duct
CHECK
All inspection panels/doors
SECURED
Skid, strut fairing’s
CHECK
Ground handling wheel (if installed) in up
position with quick-release pin installed
CHECK
Landing gear attach points, dampers (leaks
and inflation)
CHECK
AFT FUSELAGE/TAIL ROTOR
Aft fuselage skin, right side
CHECK, NO
DAMAGE ALLOWED
If equipped, internal plenum inlet screen
for obstructions (use inspection light in
tailcone)
CHECK
Battery/Battery vent (optional location)
CHECK
All inspection panels/doors
SECURED
Antenna (if installed)
CHECK
Position and anticollision lights right side
CHECK
CAUTION
The following special check applies to 269D3300-1 Aft
Fuselage Assemblies only. S/N 63 & subsequent are factory
equipped with the 269D3300-35 aft fuselage assembly and do
not require that the following check be conducted. Cracks in
the paint film alone may indicate internal structure damage
and this requires further maintenance action before further
flight.
Normal Procedures
Schweizer RSG, LLC.
Model
269D
Helicopter
Pilot's Flight Manual
4-5
Reissued:
16
Jan 2019
FAA Approved
Book 3.indd 93
8/4/19 1:25 PM