SCHUNK SRU-plus20-60, Сборка и руководство по эксплуатации

Страница: 25 / 92

Assembly
1. Screw on rotary actuator,
}
5.2.1 [
/
26] .
✓
Use centering sleeves.
✓
Observe the tightening torque for the mounting screws, see
tightening torque table.
2. Screw attachment on the pinion with two fitting screws and
two mounting screws, } 5.2.1 [ / 26] .
3. In air connections "A" and "B", screw in throttle valves and
connect compressed air lines.
Or with hose-free direct connection:
Screw locking screws into air connections "A" and
"B",
} 5.2.2 [ / 31] .
Mount throttle valves in the supply lines "a" and "b".
4. Screw in locking screws in open and not required air
connections where appropriate.
5. With the variant with electrical feed-through (EDF), connect
connection cable,
}
5.2.3 [
/
33] .
6. For application cases with horizontal swivel axes, mount
separating sleeves, } 5.3 [
/
35] .
7. Adjust angle of rotation,
}
5.4.1 [
/
38] .
8. Adjust swiveling speed,
}
5.4.2 [
/
40] .
9. Adjust absorber stroke, } 5.4.3 [ / 41] .
10. Mount sensor if necessary, } 5.5 [
/
45] .
25 11.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443