manualshive.com logo in svg

SCHUNK SRU-plus20-60, Сборка и руководство по эксплуатации

Поделиться
Скачать
SCHUNK SRU-plus20-60 Скачать руководство пользователя страница 17

Basic safety notes

2.13 Notes on particular risks

 DANGER

Risk of fatal injury from suspended loads!

Falling loads can cause serious injuries and even death.

•

Stand clear of suspended loads and do not step within their
swiveling range.

•

Never move loads without supervision.

•

Do not leave suspended loads unattended.

•

Wear suitable protective equipment.

 WARNING

Risk of injury from objects falling and being ejected!

Falling and ejected objects during operation can lead to serious
injury or death.

•

Take appropriate protective measures to secure the danger
zone.

 WARNING

Risk of injury due to unexpected movements!

If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.

•

Before starting any work on the product: Switch off the power
supply and secure against restarting.

•

Make sure, that no residual energy remains in the system.

 WARNING

Risk of injury from sharp edges and corners!

Sharp edges and corners can cause cuts.

•

Use suitable protective equipment.

 WARNING

Risk of burns through contact with hot surfaces!

Surfaces of components can heat up severely during operation.
Skin contact with hot surfaces causes severe burns to the skin.

•

For all work in the vicinity of hot surfaces, wear safety gloves.

•

Before carrying out any work, make sure that all surfaces have
cooled down to the ambient temperature.

17

11.00 | SRU-plus 20 - 60 | Assembly and Operating Manual | en | 389443

Содержание SRU-plus20-60





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды