SCHUNK RSS R1, Перевод оригинального руководства

Страница: 7 / 44

Basic safety notes
03.00 | RSS R1/W1 | Assembly and Operating Manual | en | 0889125
7
2 Basic safety notes
2.1 Intended use
The RSS radio sensor system is used for transmitting sensor posi-
tions using a transmission path from the radio sensor box to the
receiver.
NOTE
The RSS radio sensor system has FCC/IC certification and may
therefore be operated in the USA or Canada.
• The product may only be used within the scope of its technical
data, Technical data [
}
12].
• The product is intended for installation in a machine/system.
The applicable guidelines must be observed and complied with.
• The product is intended for industrial use.
• Appropriate use of the product includes compliance with all in-
structions in this manual.
2.2 Not intended use
• Any utilization that exceeds or differs from the appropriate use
is regarded as misuse.
2.3 Constructional changes
Implementation of structural changes
By conversions, changes, and reworking, e.g. additional threads,
holes, or safety devices can impair the functioning or safety of the
product or damage it.
• Structural changes should only be made with the written ap-
proval of SCHUNK.