Information FCC certification
03.00 | RSS R1/W1 | Assembly and Operating Manual | en | 0889125
39
10 Information FCC certification
The RSS is used in chucks.
A drop in pressure on the chuck during processing can cause the
clamped workpiece to come loose from the clamping and to con-
tinue to move uncontrollably. This can lead to serious property
damage and/or severe personal injury.
In order to detect this drop in pressure during processing, a pres-
sure sensor connected to the RSS monitors the pressure. If the cor-
responding threshold value set is not reached, this causes a
change to the signal, resulting in a radio signal.
In order to ensure that the radio connection is available, a cyclical
transmission is required every 10 seconds.
Note:
This product was tested and conforms to the limit values for Class
A digital equipment in accordance with Section 15 of the FCC regu-
lations. These limit values are intended to provide sufficient pro-
tection from harmful interference if the product is operated in an
industrial environment.
This product generates, uses and emits high-frequency energy and
can therefore lead to interference in radio communications if not
installed and used as outlined in the operating manual. Operating
this product in a residential area is likely to cause interference, in
which case the user is obligated to eliminate the interference at
their own cost.
