Design and description
04.00 - FW 2.x | EGL | Assembly and Operating Manual | en | 389661
27
LED Designation
Color
Function
4
Module
error
red
Indicates if there is an error; see "SCHUNK Motion
Protocol (SMP)" and "SCHUNK Drive Protocol (SDP)"
software manuals.
•
Lights up
if there is an error.
•
Does not light up
if the product is ready for operation.
•
Flashes
if there is a warning.
•
Flashes briefly
if there is an info message
(on/off about 5 times).
•
Flashes
if the hardware is not recognized or if the
status of the software is undefined (alternating with
"module status" LED).
•
Lights up (approximately 1 second) and goes out
before the logic board is updated during a firmware
update via USB Micro AB, host.
Flashes
when the logic board is updating.
Lights up
when the adapter board is being updated and
goes out when the update is finished.
5
PROFIBUS
or CAN bus
operation
yellow Indicates whether there is communication.
•
Lights up
if there is communication via CAN bus.
Flashes briefly
with each change of direction
(on/off about 2 times).
•
Lights up
if there is communication via PROFIBUS.
•
Does not light up
if communication via PROFIBUS or
CAN bus is interrupted.
6
PROFIBUS
or CAN bus off
state
red
Indicates whether communication has been interrupted.
•
Lights up
if communication via PROFIBUS or CAN bus
has been interrupted.
•
Does not light up
if there is communication via
PROFIBUS or CAN bus.
