Assembly and Operating Manual
AGE-F-XY
– Compensation Unit with spring return
16
Date printed 28.12.2009
Caution!
Sensor can be damaged during assembly.
-
Do not exceed the maximum tightening torque of 10 Ncm for the set screws.
Note
-
When adapter plates made of ferro-magnetic material (e.g. standard construction
steel) are used, the gripper must first be mounted on the adapter plate
before
set-
ting the positions of the magnetic switches. This is necessary because the use of a
magnetizable material would change the switching position of the sensor.
Figure 7: Position oft he magnetic switch MMS-P
Slide the magnetic switch into the groove until it bears against the stop (A).
To set the switching points, proceed according to the following table:
