31
3.7.2.4 Deleting the saved measured values
(Cont.)
Deleting data:
- Press the „Recall“ and buttons
- Then press the
button and confirm with the
button.
This clears the memory.
fig. 3.7.3.1
3.7.3 Memory mode “H”
The last max. 128 values are saved. In graphical mode, the display freezes so that you
can view it after completion of the measurement. In numerical mode, the last measu-
red value is displayed.
This memory mode does not record PEAK values.
3.7.3.1 Saving data
Requirements:
- In the main menu, select „Memory Settings“ and then memory mode H.
- Set the X-axis as described in chapter 3.2
To save the first measurement series:
- Press the
button to freeze the recording of the measured values.
If you recorded less than 128 measured values, you can continue recording by pres-
sing the
button. If the graphics window is full, its contents will be shifted to the
left and you can only freeze the last 128 measured values.
- To save the graphics and measured values for later evaluation, press the
button.
This returns the tension meter to measuring mode.
- If you press the
or
button, no data will be saved and the tension
meter returns to measuring mode.
