3 Assembly and start-up
10
SCHMIDT
®
ElectricPress 343-345
– V2.1
Figure 2: Press with lifting equipment (example)
If necessary, take the optionally delivered accessories out of the frame.
Fasten the transport equipment at the frame.
Carefully lift the press. The press can swing out.
Observe the center of gravity of the press.
Put the press on the press base or on the table by means of a suitable
lifting equipment.
Check if both axes of the press are horizontal and compensate the
differences, if necessary.
Screw the press down to the press base or table.
Customer-provided frame system
CAUTION
Dimension of frame system not suitable
If you ordered a press without the standard frame from SCHMIDT
Technology, you must install the press onto a suitable frame system. If the
frame system is not adequately dimensioned, problems such as the
production of defective parts or even damage to the press system can
occur.
Choose your frame system according to the maximum force of your
press.
Observe the dimensions and weight of the press used.
Before start-up, the press head must be screwed down to a stable support
system.
There is an adapter plate available for mounting of the press head on a
support system without dovetail guide.
Mount the adapter plate onto the support system.
