3 Assembly and start-up
12
SCHMIDT
®
ElectricPress 343-345
– V2.1
Upper tool
CAUTION
Construction of the tools
The owner or the entrusted construction engineer must make sure that the
construction of the tools complies with the safety regulations and that the
necessary safety measures will be observed.
Observe the maximum allowed weight for the upper tool.
For mounting the upper tool, a centric dowel pin hole with a set screw is
available for fixing it.
Insert the clamping pin into the dowel pin hole of the ram.
Fasten the upper tool using the set screw.
Figure 4: Tool holder
Other dimensions and the maximum weights for the top tools can be found in
chapter "6.1 Technical data".
Lower tool
For mounting the lower tool, a table bore and a T-slot are available.
Place the lower tool on the table plate.
Screw the lower tool down to the table plate.
Figure 5: Frame with table plate (example)
1
Table bore
2
T-Slot
