Operating and Menu Concept
20 / 52
EN-US · 30.30.01.01963 · 01 · 09/21
5.3.2 Changing parameters in the Extended Functions menu
Depending on the parameter, there are two different methods for entering values in the EF menu.
When entering numerical values, you enter them digit by digit as in the main menu:
1. Use the
button to select the desired parameter.
2. Confirm using the
button.
ð
The value that is currently set is displayed and the first digit flashes.
3. Use the
button to change the value. The value increases by 1 each time that the button is
pressed. After 9, the counter goes back to 0 when the
button is pressed.
4. Press the
button to save the modified value.
ð
The first digit is accepted and the second digit flashes.
5. Use the
button to set the second digit.
6. Press the
button to save the modified value.
ð
The second digit is accepted and the third digit flashes.
7. Use the
button to set the third digit.
8. Press the
button to save the modified value.
ð
The value is accepted and the modified parameter is displayed.
If input is interrupted for longer than 1 minute or if no input is made, the measurement screen is auto-
matically displayed.
For other parameters, you can select from predefined settings:
1. Use the
button to select the desired parameter.
2. Confirm using the
button.
ð
The current setting is displayed and flashes.
3. Use the
button to switch to the next setting.
4. Press the
button to save the desired setting.
ð
The selected setting is briefly shown on the display.
ð
The display then automatically jumps to the parameter that was just set.
5.4 Info menu [INF]
The “Info” [INF] menu is available for reading out system data such as counters, the software version, part
numbers and serial numbers.
Содержание 10.02.02.05588
Страница 1: ...Mini Compact Ejector SCPMc Operating Instructions WWW SCHMALZ COM EN US 30 30 01 01963 01 09 21 ...
Страница 16: ...Technical Data 16 52 EN US 30 30 01 01963 01 09 21 NC NO NC EB NO EB ...
Страница 51: ...30 30 01 01963 01 10 21 51 52 ...
Страница 52: ... J Schmalz GmbH EN US 30 30 01 01963 01 09 21 Subject to technical changes without notice ...