Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации

Страница: 65 / 346

5. Product description
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
65 | 268
Tinning Station - STS 1100
The tinning station STS 1100 was designed for the use of
lead-free tin solder with particularly corrosive properties.
The station has an integrated flux unit and has been
designed for tinning cross sections up to 2.5 mm² and
lengths up to 5 mm. Cross sections up to 4 mm² and
lengths up to 10 mm are possible depending on the wire
after sampling.
Scope of Application
The STS 1100 tinning station is used for fluxing and lead-
free tinning of stripped cable ends and is ideal for use on
fully automatic crimping machines as well as on transfer
systems. The wire ends are treated with flux prior to tinning. The STS 1100 is suitable for
both lead-free and leaded tin solder and meets all the requirements for uniform tinning. All
surfaces of the STS 1100 that come in contact with aggressive lead-free solder (such as tin
bath and tin pump) are provided with a special coating to prevent premature corrosion and
ensure a long service life. If twisting of the wire ends is required before fluxing / tinning, the
twisting station STW 1100 can be integrated into the CrimpCenter.
Short cycle times
Full control over the EASY operator soft-
ware
Designed for use with lead-free solder
Evenly tinned wire ends
Suitable for conductor cross sections up
to 2.5 mm² (14 AWG)
Optional for conductor cross sections up
to 4 mm² (12 AWG)
Options
Support, not adjustable
Support, horizontal adjustable
Drip protection (different versions availa-
ble)
Special jets to optimize the tin jet