manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Schleuniger CrimpCenter 64 SP Скачать руководство пользователя страница 149

8. Commissioning

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

149 | 268

8.7.6

Use ToolingShuttle

The ToolingShuttle combines the crimping applicator, the terminal reel and the paper spool

in a mobile quick changing unit for CrimpCenter fully automatic crimping machines. Instead

of changing the 3 elements separately, the preparation of a crimping station will be execu-

ted in one step. After changing the ToolingShuttle, the crimping applicator simply needs to

be removed from the ToolingShuttle and mounted on to the crimping applicator clamp.
The ToolingShuttle is only used for crimping applicators with Side Feed.

Caution

Prior to start the machine make sure that all ToolingShuttles are mounted.

Even if the terminals are led from the back to the applicator (Back Feed) the ToolingShut-

tle has to be mounted.
Any remaining openings must be closed with metal sheets.

DANGER

Risk of injury without tooling shuttles!

There is a risk of injury if there are no Tooling Shuttles mounted.

The following instructions are to be followed!

Never operate the CrimpCenter without the ToolingShuttle and / or

the guard plates!

Содержание CrimpCenter 64 SP



























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды