Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации

Страница: 227 / 346

9. Servicing / Maintenance
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
227 | 268
NOTICE
Damage to property if not observed!
Observe the following points when cleaning the machine.
Disregard may lead to damage to property.
The following instructions are to be followed!
Remove impurities, deposits and lubricant residues from the interi-
or of the machine using appropriate cleaning agents.
Never use strong agents.
Clean the plastic surfaces of the safety cover only with solvent-free
no-fuzzing cloths.
Do not use cleaning powder.
Remove carrier strip splits, wire or insulation leftovers with a vac-
uum cleaner and do not blow them off with compressed air.
Do not use any sharp-edged objects when cleaning the machine.
The surface of the platform is not sealed against liquids!
Do not use loose liquids but only with a cloth for cleaning!
Do not use high pressure cleaner, which can damage the Crimp-
Center.
Element Status / Condition / Position
Main Switch Off
Emergency stop switch (All)
Not pressed
Control voltage
Off
Safety Cover
This side up
Schleuniger recommends observing the following cleaning and care instruction to guaran-
tee continued high processing quality.
The cleaning interval depends on the type of material produced and the frequency of
operation.
The area of the blades, the wire guides and the conveyor belts should be free of waste
material in order to ensure precise processing results.
Dirt and talcum residues may affect the functioning of the machine. The machine has to
be checked and if necessary be cleaned.