manualshive.com logo in svg

Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации

Поделиться
Скачать
Schleuniger CrimpCenter 64 SP Скачать руководство пользователя страница 146

8. Commissioning

146 | 268

Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP

Conveyor belt - GM - 2m - Setting up, inserting and aligning

The conveyor belt is later secured with a tog-

gle screw on the CrimpCenter. This screw is

mounted in a bag on the conveyor belt.

1.

▹

Remove the bag.

2.

▹

Lay it aside.

3.

▹

Carefully bring the conveyor belt to the

base machine.

4.

▹

Place the carriage on the slide rail.

The height of the conveyor must be adjus-

ted.

5.

▹

Bring it to the correct height by turning

the adjusting screws on the feet of the

conveyor belt.

6.

▹

Place the spirit level, as in the picture on

the foot of the conveyor belt.

The conveyor belt must be aligned using the

spirit level.

Содержание CrimpCenter 64 SP



























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды