Schleuniger CrimpCenter 64 SP, Оригинальное руководство по эксплуатации

Страница: 176 / 346

8. Commissioning
176 | 268
Original Operating Manual | Edition 1.0 (01-2020) | CrimpCenter 64 SP
Swivel
Swivel - Side 1
Notice
Sometimes the machine switches off the control voltage automatically. This happens for
safety reasons.
The following dialog will guide you through the referencing. Follow the instructions. They
will be explained on the next pages:
Caution
Because the safety cover is open for referencing the confirm button has to be pushed for
some actions when the machine executes movements.
Tools / Aids
Fig. 89: Setup block
1
x
Fig. 90: Overview - Setup Pins
Setup block
(Article number 50000 132 570)
Set-up pin, long (1)
(article number 434 203)
Caution
If you have a printer installed on your CrimpCenter, you must use the centering pin long (4)
(article number 50000 580 482) for referencing.
Notice
The bolt marked headings (e.g.
EASY-Software (4/18)
) show
where an information is shown
and / or
where an action has to be carried out.