Schleuniger CoaxCenter 6000 Скачать руководство пользователя страница 49

Страница: 49 / 194

6. Installation / first commissioning

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

49 | 194

INSTALLATION / FIRST COMMISSIONING

This chapter describes the working steps for the mounting and commissioning of the machine.

6.1

SAFETY INSTRUCTIONS

The installation and commissioning instructions for the product, have to be followed. The following

instructions must be followed step by step to avoid property damage on the product and to reduce

the risk of injury to the personnel to an absolute minimum.

Personnel qualification

The instructions in this chapter must be carried out by

qualified personnel

CAUTION

Sequence of instructions!

Improper usage may lead to injury or property damage.
The following instructions must be carried out in the listed sequence and

warning signs must be observed.

Safety relevant points

The following security relevant points have to be mentioned specially:

■

This is a free-standing product.

■

The machine must only be operated in a dust free and dry area.

■

The electric connection must be carried out by a technical specialist and according to the local

installation regulations, see also chapter

"5.2.6 Safety installations (Page 36)"

Safety appliances / danger areas

■

For localizing the safety elements, see chapter

"5.2.6 Safety installations (Page 36)"

■

For localizing the danger areas around and in the machine, see chapter

"5.2.7 Danger zones

(Page 36)"

6.2

UNPACKING / POSITIONING

6.2.1

Lifting machine off the packaging

The

CoaxCenter 6000

is delivered in a wooden box. Accessories and tools are contained in a cardboard

box inside the main container.

Содержание CoaxCenter 6000



































































































































































































Результаты поиска

Содержание CoaxCenter 6000

Отзывы:

Бренды по названию

Популярные бренды

Schleuniger CoaxCenter 6000, Справочное руководство

Результаты поиска

Содержание CoaxCenter 6000

Отзывы:

Бренды по названию

Популярные бренды