manualshive.com logo in svg

Schleuniger CoaxCenter 6000, Справочное руководство

Поделиться
Скачать
Schleuniger CoaxCenter 6000 Скачать руководство пользователя страница 20

3. Transportation

20 | 194

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

TRANSPORTATION

Personnel qualification

The instructions in this chapter must be carried out by 

technical specialists

!

 

3.1

PACKAGING

The packaging provides enough protection during transport with common means of transportation.

It consists of:

■

Wooden pallet

■

Wooden box

Store the packaging for later use on a weatherproof location.

Recycle the unneeded packaging.

NOTICE

Inadvertently transportation of the product can lead to property damage.

■

Handle the packaging with care

■

Observe the packaging signs

■

Wherever applicable remove the packaging not before placing on site of operation

■

Move the packaging with a forklift or pallet truck to the site of operation

3.2

PACKAGING SIGNS (STICKERS)

On the packaging, the following packaging stickers are attached:

Symbol

Meaning

Description

Fragile

Handle the packaging carefully. Avoid intense shock and

pressure.

This side up

The arrows point to the top side of the packaging. Store and

transport the packaging upright. Do not tilt.

Avoid moistness

Store and transport the packaging protected against moist-

ness.

Содержание CoaxCenter 6000



































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды