Schleuniger CoaxCenter 6000 Скачать руководство пользователя страница 37

Страница: 37 / 194

5. Product description

Reference Manual |Edition 5.0 (09-2016) |

CoaxCenter 6000

37 | 194

CAUTION

Personal and property damage when product is operated by

untrained or not properly trained personnel.

Employment of insufficiently qualified personnel by ignorance in handling the

product and their potential hazard may lead to personnel injury and property

damage.

■

Operate the product only by trained personnel

■

Carry out regular staff training

Unplug machine from the mains- and compressed air supply

There is a danger of electric shock by contact with parts inside the machine and on the mains con-

nection. Touching electric components can cause injury to the operator personnel. Unintentional

operation of pressurized components, or unintentionally escaping compressed air can cause injury.
Therefore always before opening the machine:

■

Turn off the main switch, block against switching on again and disconnect the machine from the

mains (for hard wired machines, the main switch serves as a mains disconnecter).

■

Unplug the machine from the compressed air supply.

Содержание CoaxCenter 6000



































































































































































































Результаты поиска

Содержание CoaxCenter 6000

Отзывы:

Бренды по названию

Популярные бренды

Schleuniger CoaxCenter 6000, Справочное руководство

Результаты поиска

Содержание CoaxCenter 6000

Отзывы:

Бренды по названию

Популярные бренды