Schlage HK-CR, Руководство пользователя

Страница: 44 / 88

Setup Menu
40
Table 12-8: Setup Command Menu
Setup Menu
Password = 2
Set Language
Select Language
Set Date Format
Select Date Format
Set Time and Date
Month (MM)
Day (DD)
Year (YY)
Hour (HH)
Minute (MM)
Set Address
New Address
Set ID Length
New ID Length
Set Facility
Auxiliary Output Control
Select Auxiliary Output 1/2
Aux 1 Out Control
Aux 2 Out Control
Output Set by Tamper
Output Set by ID Refused
Output Set by Duress
Output Set by Try Again
Output Set by F1 Key
Output Set by F2 Key
Output Set on Battery Backup
Auxiliary Output Cleared by Timer
Aux Output Cleared by Valid Access
Set Reader Mode
To Master/Remote
Set Serial
a
RS-422 (Y/N)
Select Baud Rate
RS-232 (Y/N)
Select Baud Rate
Use RS-232 for Printer or Host
Set Serial
a
Verify/Enter IP Address
Verify/Enter Gateway
Verify/Enter Host Bit
Set Duress Code
Enter Duress Code
Set Beeper
Turn Beeper On/Off (Y/N)
Upgrade
Enter Code
a. The Set Serial command has different values based on whether the HandReader is configured
for serial or modem communication versus Ethernet communication.