Schlage HK-CR, Руководство пользователя

Страница: 37 / 88

33
Programming the HandReader
The HandReader is programmed via a series of command menus. A summary of the
menus and commands is given in Table 6.
Table 10-5: Basic Command Mode Structure
Service Menu
Password 1 Setup Menu
Password 2 Management
Menu
Password 3 Enrollment
Menu
Password 4 Security Menu
Password 5
Calibrate Set Language List Users Add User Set User Data
Status Display Set Date Format Data From
Network*
Add/Remove
User Set TZ Table
Network Status* Set Time and
Date
Data to
Network* Reject
Threshold
Set Address Set Passwords
Set ID Length Clear Memory
Set Facility Special Enroll
Aux Out Control
Set Reader
Mode
Set Serial
Set Duress
Code
Set Beeper
Upgrade
* These menu options only appear in HandReaders configured as a “Master” unit.
To control access to the command menus, each menu has a unique password. This
password is requested as a part of the process for accessing each menu. A supervisor
must enter the correct password for that menu to access that menu. The default menu
passwords are given in Table 6.
To increase the security of the HandReader, Schlage Biometrics recommends changing
the passwords for the command menus to new numbers. These password numbers can
be up to 10 digits long. This is done with the Set Passwords command described on.