Schlage HK-CR, Руководство пользователя

Страница: 36 / 88

Enter a Command Menu
32
Press
3
for the Management Menu.
Press
4
for the Enrollment Menu.
Press
5
for the Security Menu.
5. Press
Enter
.
6. If you are authorized to use this command the first command option in the selected
menu appears.
7. If you are not authorized to enter this command the display appears as follows.
READY
*:
To access all five menus you must be the first person enrolled in a new system
installation or you must have the highest authority level and the correct passwords for all
five menus. If you are blocked from a menu to which you should have access, verify your
access/password rights with management personnel. If authority levels or passwords
have been incorrectly changed and you must have access to all menus, it is possible to
reset the HandReader’s memory. Resetting memory allows access to all five menus by
the first person enrolled (as if it is a new system installation), but this means that any user
information programmed into the HandReader must be re-entered (manually or by using
HandNet software to restore the user information). Be sure you need to reset memory
before performing this function. To reset memory, refer to the Erasing HandReader
Memory on page 29.
Once an operator has entered a command menu, there are three options available for
navigating the command menu system.
• Press
#
Yes
to enter the command shown on the display.
• Press
*
No
to step to the next command in the menu.
• Press
Clear
to exit the command menu (pressing any numeric key also exits the
command menu). If the operator is in a command’s sub-menu, the operator may have
to press
Clear
multiple times to completely exit the command menu.
NOTE
!
Navigating
Command
Menus